Argue With Everyone Political Forums  

Go Back   Argue With Everyone Political Forums > Misc > ONEWHITEDUCK

Your Ad Here
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 04-15-2008, 11:41 AM
THE WATCHER's Avatar
ONEWHITEDUCK
 
Join Date: Feb 2008
Location: this universe
Posts: 6,007
Talking God Likes Guns Too :-)

SO FUCK YOU LIB TARD PEACE CUNTS FOR THE NWO :-(

When I was building my house here in washington.......I could only afford so much after buying the land outright.......so the house went up on a 5 footpony wall and the slope is such that I hand dug it down 2 1/2 feet.....and used all that dirt to make a flat spot out back for a yard........Then I hand poured a complex footer drain system and about 70 tons of concrete I mixed in a wheel barrow to complete the basement and back patio :-O

( IT WAS A MAJOR EARTHQUAKE RE-ENFORCEMENT PROJECT )

That first earthquake made me nervous :-O

MY HOUSE IS SITTIN ON A CONCRETE BARGE :-)


ehehehehehe

ANYWAY........in order to put in some extra doors I had to chew through some old Footers........so I decided to use a mini-14 in .223 with FMJ to shoot through the concrete footers.........I set up an elaborate bunker and placed wood tree rounds around the cut to catch any slugs and had the kids go put some of their loud thump thump music on and go up to the road to listen for what it would sound like to the nieghbors ;-)..........They said it sounded like somebody hitting a 55 gal. drum with a baseball bat and nobody shoyld notice.....so I started going at it and the friggin extractor broke........BOY WAS I PISSED.........I was all suited up in kevlar with a snowmobile suit and a Crash helmet.....with no where to go.........BUT UP IN CALIBRE :-)

I just happened to have a swedish model 47 semi-auto in 8x57 Mauser.....and had the kids do a repeat of what it sounded like...before I started cutting in earnest.......They said it sounded like somebody pounding a 55 Gal. drum with a sledge hammer.....but it should be ok if they cranked the sterio........SO........I went ahead with the operation :-)

It takes about 35 rounds (70 to cut out a section) to cut through a 12" x 16" concrete footer.....rebar and all......and the bullets were 150 grain soft points that littleraLLY DISINTEGRATE....BUT THE HAVE SO MUCH ENRGY THAT THEY ACTUALLY CUT BULLET SHAPED HOLEs IN SOME OF THE STONES SUSPENDED IN THE CONCRETE :-)

i'VE GOT SOME AUTO MECHANIC AND GUN STORIES TOO........EHEHEHEHEHEHEHEHEHE

gun are toys and tools :-)
__________________
If you don't KNOW where you come from...you WILL wind up going nowhere.

That goes for Ideas, institutions as well as individuals :-I

YouTube - - TRANCE Form America - 3of7

GOD LIKES GUNS TOO :-)

PROVE HE DOESN'T YOU STUPID FUCK TARDS :-)

Last edited by THE WATCHER; 04-15-2008 at 11:49 AM.
Reply With Quote
  #2 (permalink)  
Old 04-15-2008, 12:28 PM
THE WATCHER's Avatar
ONEWHITEDUCK
 
Join Date: Feb 2008
Location: this universe
Posts: 6,007
Default

GUESS WHAT ASSCLOWNS......PROPHECY SAID "THE FALSE PROPHET COMES IN THE NAME OF PEACE"

Live Search: THE FALSE PROPHET COMES IN THE NAME OF PEACE

YOU NWO DOCTOR WORSHIPPING MEDICARE CUNTS WILL NEVER GET PEACE ON YOUR TERMS :-O

YOU CAN'T HAVE PEACE WITHOUT GOD........SO TUFF TITTIES :-I

AND YOUR DOCTORS CAN'T GIVE YOU ETERNAL LIFE EITHER........THEY CAN ONLY CHEAT YOU :-(

AND THEY DO
Reply With Quote
  #3 (permalink)  
Old 04-22-2008, 01:33 PM
THE WATCHER's Avatar
ONEWHITEDUCK
 
Join Date: Feb 2008
Location: this universe
Posts: 6,007
Default

AND HE LIKE AIRPLANES AND MUSIC TOO :-O

code song

YouTube - Matchbox Twenty - Unwell (Video)

I'm "JUST" a LIT 'em' TELL

The Enigma of William Tell, 1933

ELECTRO MAGNETIC TELL - Live Search

~0~
Reply With Quote
  #4 (permalink)  
Old 04-22-2008, 02:01 PM
Political Mastermind
 
Join Date: Aug 2006
Posts: 1,369
Default

Quote:
Originally Posted by THE WATCHER View Post
SO FUCK YOU LIB TARD PEACE CUNTS FOR THE NWO :-(

When I was building my house here in washington.......I could only afford so much after buying the land outright.......so the house went up on a 5 footpony wall and the slope is such that I hand dug it down 2 1/2 feet.....and used all that dirt to make a flat spot out back for a yard........Then I hand poured a complex footer drain system and about 70 tons of concrete I mixed in a wheel barrow to complete the basement and back patio :-O

( IT WAS A MAJOR EARTHQUAKE RE-ENFORCEMENT PROJECT )

That first earthquake made me nervous :-O

MY HOUSE IS SITTIN ON A CONCRETE BARGE :-)


ehehehehehe

ANYWAY........in order to put in some extra doors I had to chew through some old Footers........so I decided to use a mini-14 in .223 with FMJ to shoot through the concrete footers.........I set up an elaborate bunker and placed wood tree rounds around the cut to catch any slugs and had the kids go put some of their loud thump thump music on and go up to the road to listen for what it would sound like to the nieghbors ;-)..........They said it sounded like somebody hitting a 55 gal. drum with a baseball bat and nobody shoyld notice.....so I started going at it and the friggin extractor broke........BOY WAS I PISSED.........I was all suited up in kevlar with a snowmobile suit and a Crash helmet.....with no where to go.........BUT UP IN CALIBRE :-)

I just happened to have a swedish model 47 semi-auto in 8x57 Mauser.....and had the kids do a repeat of what it sounded like...before I started cutting in earnest.......They said it sounded like somebody pounding a 55 Gal. drum with a sledge hammer.....but it should be ok if they cranked the sterio........SO........I went ahead with the operation :-)

It takes about 35 rounds (70 to cut out a section) to cut through a 12" x 16" concrete footer.....rebar and all......and the bullets were 150 grain soft points that littleraLLY DISINTEGRATE....BUT THE HAVE SO MUCH ENRGY THAT THEY ACTUALLY CUT BULLET SHAPED HOLEs IN SOME OF THE STONES SUSPENDED IN THE CONCRETE :-)

i'VE GOT SOME AUTO MECHANIC AND GUN STORIES TOO........EHEHEHEHEHEHEHEHEHE

gun are toys and tools :-)
__________________
If you don't KNOW where you come from...you WILL wind up going nowhere.

That goes for Ideas, institutions as well as individuals :-I

YouTube - - TRANCE Form America - 3of7

GOD LIKES GUNS TOO :-)

PROVE HE DOESN'T YOU STUPID FUCK TARDS :-)
You should try and defunk Mythbusters, By standing up and shooting a circle in the floor around your feet and see if you can cut a whole in there so you fall through. I am a little supprised they went through the Rebar too, I thought they would bounce off /go at crazy angles and not through it.
Reply With Quote
  #5 (permalink)  
Old 04-22-2008, 03:58 PM
THE WATCHER's Avatar
ONEWHITEDUCK
 
Join Date: Feb 2008
Location: this universe
Posts: 6,007
Default

I've some pieces of rebar with bullet cuts in em too.

TRUST ME.....a plain .223 fmj will walk right through 1/2 stainless plate at 100 yds.

an 8x57...or 06' even with soft points will POKE HOLES in 3/4 stainless at the same distance.

AND BLACK TIPPED AP ROUNDS in 8x57 or 30-06 will poke holes in 2" stainless plate at 200 yds ;-)

ehehehehehehehehe

Hatcher's Notebook
by Julian S. Hatcher

Published by Stackpole Books
Publication date: 1962
ISBN:0811707954

General Hatcher was the Army's Chief of Ordinance during WW II. This book presents a wealth of information on how guns work. The mechanical details, specifications of steels used, heat treatment, testing, gun powder, ballistics, accuracy, records of US rifles, and anything else you want to know about. This is THE guide.


UNCLE JULIAN ;-)
Reply With Quote
  #6 (permalink)  
Old 04-22-2008, 04:13 PM
THE WATCHER's Avatar
ONEWHITEDUCK
 
Join Date: Feb 2008
Location: this universe
Posts: 6,007
Default

IN A MACHINE SHOP.....you can use a dull or negative rake carbide drill at 5 or 6 thousand rpm. to burn out broken taps out of expensive parts.

A bullet leaving the muzzle of an 8x57 at 2600 fps out of a barrel with a 1 in 9" twist come out spinning at 3466.66666 rpS (revolutions per sec.) x 60 = 207999 RPM.

spinning that fast and then encountering stones and rebar trapped in cement.....well.....IT DON'T NEED TO BE SHARP ;-)
Reply With Quote
  #7 (permalink)  
Old 04-22-2008, 10:01 PM
Political Mastermind
 
Join Date: Aug 2006
Posts: 1,369
Default

Quote:
Originally Posted by THE WATCHER View Post
IN A MACHINE SHOP.....you can use a dull or negative rake carbide drill at 5 or 6 thousand rpm. to burn out broken taps out of expensive parts.

A bullet leaving the muzzle of an 8x57 at 2600 fps out of a barrel with a 1 in 9" twist come out spinning at 3466.66666 rpS (revolutions per sec.) x 60 = 207999 RPM.

spinning that fast and then encountering stones and rebar trapped in cement.....well.....IT DON'T NEED TO BE SHARP ;-)
I knew there was a reason why I came back to AWE........My bastard friends always want to use the EDM machine and I say noooooo, it is faster to use a carbide drill. I forgot about the rebar being trapped in cement when I wrote my last post.
I remember when I was talking to a cop friend of mine, and he was telling me (It was a long time ago) when the sales man came in to demostrate the new Bullet proof jackets the force was going to buy.He sat down, put the jacket over his leg, Took out his knife out and then stabbed himself though the jacket. Dumb Shit....Bhawahahahaah!!!!!!
Reply With Quote
  #8 (permalink)  
Old 04-23-2008, 01:17 PM
THE WATCHER's Avatar
ONEWHITEDUCK
 
Join Date: Feb 2008
Location: this universe
Posts: 6,007
Default

COP KILLER BULLETS MY ASS........ANOTHER FUCKTARD KIDDNAPPING OF WORDS.

ANY CENTERFIRE RIFLE BULLET WILL GO THROUGH KEVLAR VESTS.

FUCK THOSE KEYSTONE ROBOT COPS

THEY FUCKIN NEED TO BE WOKE UP TOO

JESUS IS FUCKING COME HOME CHILDREN

AND HE'S NOT FUCKIN HAPPY ABOUT THIS SHIT :-(

YouTube - 911 Truth: Groundhog Day & Mind Control?

OR MOST OF YOU FUCKERS EITHER :-O
Reply With Quote
  #9 (permalink)  
Old 04-23-2008, 02:24 PM
THE WATCHER's Avatar
ONEWHITEDUCK
 
Join Date: Feb 2008
Location: this universe
Posts: 6,007
Default

~?~

YouTube - Mr. Shorty by Marty Robbins

~!~
Reply With Quote
  #10 (permalink)  
Old 08-13-2008, 04:29 PM
ONEWHITEDUCK's Avatar
ONEWHITEDUCK
 
Join Date: Sep 2007
Location: Puget Sound
Posts: 16,223
Talking

Quote:
Originally Posted by THE WATCHER View Post
SO FUCK YOU LIB TARD PEACE CUNTS FOR THE NWO :-(

When I was building my house here in washington.......I could only afford so much after buying the land outright.......so the house went up on a 5 footpony wall and the slope is such that I hand dug it down 2 1/2 feet.....and used all that dirt to make a flat spot out back for a yard........Then I hand poured a complex footer drain system and about 70 tons of concrete I mixed in a wheel barrow to complete the basement and back patio :-O

( IT WAS A MAJOR EARTHQUAKE RE-ENFORCEMENT PROJECT )

That first earthquake made me nervous :-O

MY HOUSE IS SITTIN ON A CONCRETE BARGE :-)


ehehehehehe

ANYWAY........in order to put in some extra doors I had to chew through some old Footers........so I decided to use a mini-14 in .223 with FMJ to shoot through the concrete footers.........I set up an elaborate bunker and placed wood tree rounds around the cut to catch any slugs and had the kids go put some of their loud thump thump music on and go up to the road to listen for what it would sound like to the nieghbors ;-)..........They said it sounded like somebody hitting a 55 gal. drum with a baseball bat and nobody shoyld notice.....so I started going at it and the friggin extractor broke........BOY WAS I PISSED.........I was all suited up in kevlar with a snowmobile suit and a Crash helmet.....with no where to go.........BUT UP IN CALIBRE :-)

I just happened to have a swedish model 47 semi-auto in 8x57 Mauser.....and had the kids do a repeat of what it sounded like...before I started cutting in earnest.......They said it sounded like somebody pounding a 55 Gal. drum with a sledge hammer.....but it should be ok if they cranked the sterio........SO........I went ahead with the operation :-)

It takes about 35 rounds (70 to cut out a section) to cut through a 12" x 16" concrete footer.....rebar and all......and the bullets were 150 grain soft points that littleraLLY DISINTEGRATE....BUT THE HAVE SO MUCH ENRGY THAT THEY ACTUALLY CUT BULLET SHAPED HOLEs IN SOME OF THE STONES SUSPENDED IN THE CONCRETE :-)

i'VE GOT SOME AUTO MECHANIC AND GUN STORIES TOO........EHEHEHEHEHEHEHEHEHE

gun are toys and tools :-)
__________________
If you don't KNOW where you come from...you WILL wind up going nowhere.

That goes for Ideas, institutions as well as individuals :-I

YouTube - - TRANCE Form America - 3of7

GOD LIKES GUNS TOO :-)

PROVE HE DOESN'T YOU STUPID FUCK TARDS :-)
New] Who the hell needs a gun...WHEN YA GOT AN F22

YouTube - F22 (Blow Me Away)

^I^
__________________
If you don't KNOW where you come from...you WILL wind up going nowhere.

That goes for Ideas, institutions as well as individuals :-I

http://www.youtube.com/watch?v=nUncnWxjUXM

PSI TECH INVESTIGATIONS and LAW ENFORCEMENT
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


» Navigation

Political Links Page

Blogs by AWE Members

Advertisers support this site - if you're interested in their product, take a look!


$5 monthly donation:

$10 monthly donation:



All times are GMT -5. The time now is 06:52 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.2.0
Ad Management by RedTyger
Poltical Topsites PolitiPoll.net - Political Web Rankings